How to easily prepare the DIY remedy
At this point, show some attention, as this method involves a series of steps that must be followed to the letter. The first thing to do is to get two plastic bottles, with a minimum capacity of one and a half or two liters.
Afterwards you will need a beer, water, honey and dried yeast or a fresh version.
In addition to these first ingredients, you will have to add others: you will need scotch, aluminum foil, a scissors and a led light, very important for the execution of the trap.
This small light must be switched on and off by means of a mechanism connected to a battery.
The first step to create this particular trap is to take one of the two bottles 30 cm high. At 10 cm, starting from the neck go down and cut, to get so two parts of the bottle.
Now it will be necessary to take the upper part without the cap, and then insert it upside down inside the second part of the bottle.
With the second bottle and starting from the bottom, you will count 10 cm, to cut according to the same method used for the first bottle.
In this way you will get a sort of plastic cup that you will cut starting from the top, going down about 45 cm to make many small cuts, not exceeding 5 centimeters.
The next and final steps of the preparation
Now we will start to make the mixture to be inserted inside the trap, using as a basic element beer or water, depending on what you have in the house. To add 4 tablespoons of processed white sugar to 250 ml of warm water or to beer.
