Let’s find out how to use baking soda for the sink and clean the spaces between tiles to dissolve dirt and free the spaces from germs and bacteria!
Unclogging the sink with baking soda
In this case, it is generally enough to pour a handful into the sink, immediately add the vinegar and the sink is immediately unblocked. But how to adjust the doses? Here’s how to do it:
A liter of water
100 g baking soda
100g of salt
Excellent for cleaning sink pipes, this mixture is really effective. Boil a liter of water in a saucepan, then pour it into a bowl and add about 100 grams of baking soda and 100 grams of salt.
Carefully mix the salt and baking soda solution, pour it into the blocked sink drain and immediately pour in the boiling water. Let it sit for a few minutes and repeat the process until the sink drain is clear.
Why spread baking soda between the tiles
Using baking soda between tiles is an effective grandmother’s remedy capable of guaranteeing impeccable results. Cleaning the small spaces between the tiles with this natural ingredient is a great idea because it ensures very satisfactory results and you notice it as you use it.
You can use baking soda as many times as you want to clean the tile joints instead of products with bleaches that damage them and also cause holes to appear between the spaces. Below is the procedure to correctly use baking soda on tiles!
How to use baking soda on tiles
Here’s what you need to get flawless grout:
100 g of baking soda
200ml of water
Mix the two ingredients and knead until you obtain a thick mixture that can be spread over the surface to be treated. Also use a small brush to scrub the grout and remove any accumulated dirt.
Let the mixture sit for at least 20 minutes, so that any remaining dirt can soften, then continue rubbing for a few more minutes and finally dry the tiles with a damp, wrung out microfiber cloth.
You can also use diluted baking soda, simply dissolve 50g of baking soda in 500ml of water and put the solution in a spray bottle. Spray the mixture on the joints and let it sit for a few minutes, then scrub with the laundry brush and finally dry with a microfiber cloth.
